吴忠躺衫网络科技有限公司

電子發燒友App

硬聲App

0
  • 聊天消息
  • 系統消息
  • 評論與回復
登錄后你可以
  • 下載海量資料
  • 學習在線課程
  • 觀看技術視頻
  • 寫文章/發帖/加入社區
會員中心
創作中心

完善資料讓更多小伙伴認識你,還能領取20積分哦,立即完善>

3天內不再提示
電子發燒友網>電子資料下載>類型>參考設計>AD5770R mbed示例

AD5770R mbed示例

2021-03-23 | pdf | 122.49KB | 次下載 | 3積分

資料介紹

This version (14 Jan 2021 05:44) was approved by Robin Getz.The Previously approved version (03 Jan 2021 21:46) is available.Diff

AD5770R Mbed Example

Supported Device

Introduction

The AD5770R is a 6-channel, 14-bit resolution, low noise, programmable current output digital-to-analog converter (DAC) for photonics control applications. This chip incorporates a 1.25?V on-chip voltage reference, a 2.5 kΩ precision resistor for reference current generation, die temperature, output monitoring functions, fault alarm, and reset functions.

The AD5770R contains five 14-bit resolution current sourcing DAC channels and one 14-bit resolution current sourcing/ sinking DAC channel.

Channel 0 can be configured to sink up to 60 mA and source up to 300 mA. Channel 1 to Channel 5 have multiple, programmable output current sourcing ranges, set by register access. Each DAC can operate with a wide power supply rail from 0.8?V to AVDD ? 0.4 V for optimizing power efficiency and thermal power dissipation.

This page describes the AD5770R firmware example running on the SDP-K1 controller board, interfacing with the AD5770R evaluation board. The firmware example comprises 3 layers of software, built on top of the Mbed OS.

  • Console Application - uses the ADI console libraries to provide a basic terminal UI
  • AD5770R No-OS Driver - AD5770R device C API
  • Mbed Platform Drivers - Hardware Abstraction Layer (SPI, GPIO, …) to adapt No-OS driver to Mbed OS

The AD5770R Mbed firmware example can be used as a starting point for developing your own code in your own environment utilizing the benefits of the Mbed platform. The Mbed Platform simplifies the overall software development process by providing a common low level driver abstraction. This reduces the hardware dependency as any Mbed enabled board can be used with same firmware with little to no modifications, usually just changing the pin mapping.

Useful links

Hardware Setup

The AD5770R Evaluation Board is connected to SDP-K1 using the 120-pin SDP Connector. The evaluation board must be powered externally, typically using an external 3.3V DC supply connected to the AVDD input supply terminal, if using the default power supply jumper settings.

The SDP-K1 is connected to a PC through a USB cable. The firmware image, a .BIN file created using the online mbed compiler, can be loaded into SDP-K1 board by copying the .BIN file to the drive representing the SDP-K1. The SDP-K1 provides a USB to Serial link (UART) and any serial terminal (such as Teraterm, Putty, Coolterm, etc) can be used to connect to by configuring terminal with the necessary settings (serial port, baud rate, data bits, etc).

Connect the VIO_ADJUST jumper on the SDP-K1 board to 3.3V position to drive SDP-K1 GPIOs at 3.3V

The default jumper configuration of the evaluation board selects a diode dummy load on all of the output channels. Refer to the evaluation board user guide for the jumper configuration necessary to route the output current to the screw terminal.

AD5770R Mbed Firmware

Source Code

The latest version of the example code is available here:

Quick Start

If you are familiar with the Mbed platform, the following is a basic list of steps required to start running the code:

  • Connect the evaluation board to the SDP-K1 controller board, and power it appropriately, usually 3.3V to AVDD.
  • Connect the SDP-K1 controller board to your computer over USB.
  • Go to the link of the code provided above in the 'Source Code' section and import the code into the Mbed online compiler
  • Ensure the SDP-K1 controller board is selected as the target
    • If a different controller board is being used, then it should be selected, and the pin out in app_config.h may also need to be updated.
  • In the Mbed Online IDE compile the code.
  • After a successful compile a binary file (.BIN) will be downloaded to your computer.
  • Drag and drop this binary to the USB drive corresponding to the SDP-K1 controller board.
  • Start up a serial terminal emulator (e.g. Tera Term)
    • Find the com-port your controller board is connected on and select it.
    • Set the baud-rate for 115200 baud, 8 data, no parity, 1 stop bit.
    • Reset the controller board and connect.
  • The terminal windows should display the console menu providing access to the AD5770R functionality.

Firmware in Detail

The example source code is made available from Mbed, and can be imported into the online Mbed compiler and compiled there, entirely in a web browser. The example is menu driven, providing keyboard shortcuts to access/execute the menus items, and prompting for further inputs where necessary. When the example runs, it attempts to connect and initialize the AD5770R. The configuration used is defined in the ad5770r_user_config.h file, which can be modified as needs be to suit specific applications.

Note: While much of the functionality of the AD5770R No-OS driver is made available through the console UI, not all function are available. The additional AD5770R functionality can only be configured the ad5770r_user_config.c file.

The AD5770R Console App main menu provides basic initialization/reset type functions, and access to several sub-menus that provide more detailed configuration and control settings. Like most menus in the firmware, the menu options are framed by a header and footer that display status information related to the functions on the menu.

The value of the scratchpad register is displayed in both the header and the footer. After reading the scratchpad value for the header, the value is incremented and written back to the device, such that the scratchpad footer value should always be equal to the header value + 1. This can be useful a debug aid to confirm communications.

DAC Operations

This menu provides the ability to set the Input and DAC register values, and control the update of the DAC using both the hardware and software LDAC functions. The ordering of menu items is intended to follow the order in which actions are typically performed by the user.

There are three ways in which the DAC output may be controlled using this menu.

  • Write to Input Channel(s), set software LDAC shadow value, then write software LDAC to update DAC output
  • Write to Input Channel(s), toggle hardware LDAC
  • Write to DAC Channel to directly update DAC output

Toggling a channel in the software LDAC shadow sets a bit corresponding to that channel in a mask. This SW LDAC Channel shadow value can then be written in a single transaction, transferring the input to the DAC value for all of the channels which are set in the shadow mask.

The channels affected by the hardware LDAC pin toggling are set in the ad5770r_user_config.h file at compile time.

The toggling of the hardware LDAC is outside of the AD5770R No-OS driver, and as such the DAC values are not updated by this action.
For support on this firmware example and No-OS drivers please go to Engineer-Zone.

評論

查看更多

下載排行

本周

  1. 1電子電路原理第七版PDF電子教材免費下載
  2. 0.00 MB  |  1491次下載  |  免費
  3. 2單片機典型實例介紹
  4. 18.19 MB  |  95次下載  |  1 積分
  5. 3S7-200PLC編程實例詳細資料
  6. 1.17 MB  |  27次下載  |  1 積分
  7. 4筆記本電腦主板的元件識別和講解說明
  8. 4.28 MB  |  18次下載  |  4 積分
  9. 5開關電源原理及各功能電路詳解
  10. 0.38 MB  |  11次下載  |  免費
  11. 6100W短波放大電路圖
  12. 0.05 MB  |  4次下載  |  3 積分
  13. 7基于單片機和 SG3525的程控開關電源設計
  14. 0.23 MB  |  4次下載  |  免費
  15. 8基于AT89C2051/4051單片機編程器的實驗
  16. 0.11 MB  |  4次下載  |  免費

本月

  1. 1OrCAD10.5下載OrCAD10.5中文版軟件
  2. 0.00 MB  |  234313次下載  |  免費
  3. 2PADS 9.0 2009最新版 -下載
  4. 0.00 MB  |  66304次下載  |  免費
  5. 3protel99下載protel99軟件下載(中文版)
  6. 0.00 MB  |  51209次下載  |  免費
  7. 4LabView 8.0 專業版下載 (3CD完整版)
  8. 0.00 MB  |  51043次下載  |  免費
  9. 5555集成電路應用800例(新編版)
  10. 0.00 MB  |  33562次下載  |  免費
  11. 6接口電路圖大全
  12. 未知  |  30320次下載  |  免費
  13. 7Multisim 10下載Multisim 10 中文版
  14. 0.00 MB  |  28588次下載  |  免費
  15. 8開關電源設計實例指南
  16. 未知  |  21539次下載  |  免費

總榜

  1. 1matlab軟件下載入口
  2. 未知  |  935053次下載  |  免費
  3. 2protel99se軟件下載(可英文版轉中文版)
  4. 78.1 MB  |  537793次下載  |  免費
  5. 3MATLAB 7.1 下載 (含軟件介紹)
  6. 未知  |  420026次下載  |  免費
  7. 4OrCAD10.5下載OrCAD10.5中文版軟件
  8. 0.00 MB  |  234313次下載  |  免費
  9. 5Altium DXP2002下載入口
  10. 未知  |  233046次下載  |  免費
  11. 6電路仿真軟件multisim 10.0免費下載
  12. 340992  |  191183次下載  |  免費
  13. 7十天學會AVR單片機與C語言視頻教程 下載
  14. 158M  |  183277次下載  |  免費
  15. 8proe5.0野火版下載(中文版免費下載)
  16. 未知  |  138039次下載  |  免費
网上百家乐官网网址| 线上百家乐官网赢钱| 聚宝盆百家乐的玩法技巧和规则| 百家乐官网怎么下注能赢| Bet百家乐娱乐城| 正品百家乐官网网站| 同花顺国际娱乐城| KTV百家乐的玩法技巧和规则| 恒丰百家乐官网的玩法技巧和规则| 玩百家乐官网平台| 藁城市| 鸿博,| qq德州扑克官网| 大发888送58| 百家乐双龙| 百家乐游戏官网| 网上百家乐官网游戏下载| 顶尖百家乐官网学习| ,博彩通| 大发888国际娱乐平台| 威尼斯人娱乐城真人百家乐| 新加坡百家乐的玩法技巧和规则| 百家乐赌博彩| 百家乐投注必胜法| 金道百家乐游戏| 波浪百家乐官网游戏中| 百家乐官网合理的投注法| 苏州市| 澳门百家乐必胜| 鸿利国际娱乐城| 喀喇沁旗| 网上百家乐官网真实度| 石嘴山市| 泷泽罗拉种子| 赌博游戏平台| 伯爵百家乐赌场娱乐网规则| 上市百家乐评论| 火箭百家乐的玩法技巧和规则| 德州百家乐扑克牌| 大发888中文版| 大发888娱乐场下载iypu rd |