吴忠躺衫网络科技有限公司

電子發燒友App

硬聲App

0
  • 聊天消息
  • 系統消息
  • 評論與回復
登錄后你可以
  • 下載海量資料
  • 學習在線課程
  • 觀看技術視頻
  • 寫文章/發帖/加入社區
會員中心
創作中心

完善資料讓更多小伙伴認識你,還能領取20積分哦,立即完善>

3天內不再提示
創作
電子發燒友網>電子資料下載>類型>參考設計>加入時間:清華大學2007年01月25日下午3:33

加入時間:清華大學2007年01月25日下午3:33

2021-03-22 | pdf | 68.39KB | 次下載 | 2積分

資料介紹

This version (25 Jan 2021 11:17) was approved by Ioana Chelaru.The Previously approved version (14 Jan 2021 05:11) is available.Diff

AD738x - No-OS Driver

Supported Devices

Evaluation Boards

Overview

The AD7380, AD7381,AD7383,AD7384,AD7386, AD7387 and AD7388, are a 16-bit, 14-bit and 12- bit pin compatible family of dual simultaneous sampling, high speed, low power, successive approximation analog-to-digital converters (ADC) that operate from a 3.3 V power supply and features throughput rates up to 4 MSPS. The analog input type is differential for the AD7380 and AD7381,can accept a wide common mode input voltage and are sampled and converted on the falling edge of CS. The AD7383 and AD7383 have the pseudo-differential input while the AD7386, AD7387 and AD7388 have single-ended input. The AD7380, AD7381,AD7383,AD7384,AD7386, AD7387 and AD7388 family has optional integrated on-chip oversampling blocks to improve dynamic range and reduce noise at lower bandwidths. An internal 2.5 V reference is included.

Alternatively, an external reference up to 3.3 V can be used. The conversion process and data acquisition use standard control inputs allowing for easy interfacing to microprocessors or DSPs. It is compatible with 1.8 V, 2.5 V, 3.3 V interfaces, using the separate logic supply.

The dual AD7380, AD7381,AD7383,AD7384,AD7386, AD7387 and AD7388 family is available in a 16-lead 3mm x 3mm LFCSP package with operation specified from ?40°C to +125°C.

Applications

  • Motor control position feedback
  • Motor control current sense
  • Data acquisition systems
  • EDFA applications
  • I and Q demodulation
  • SONAR
  • Power Quality

HDL Design Description

In the ADI Reference Designs HDL User Guide can be found an in-depth presentation and instructions about the HDL design in general.

The reference design uses the standard SPI Engine Framework with an integrated pulse generator, which will provide the required conversion rate for the ADC.

In order to build the HDL design the user has to go through the following steps:

  1. Confirm that you have the right tools (the reference design requires Vivado 2018.3)
  2. Clone the HDL GitHub repository (the project is located at ad738x_fmc)

Software Setup

In order to perform the software setup the user has to go through the following steps:

  1. Confirm that you have the right tools (the reference design requires XSDK)
  2. Clone the No-OS GitHub repository (the project is located at ad738x-fmcz )
  3. Follow the instructions provided by software_setup.

No-OS Driver Description

Functions Declarations

Function Description
int32_t ad738x_init(ad738x_dev **device, ad738x_init_param init_param)
Initialize the device.
int32_t ad738x_remove(ad738x_dev *dev)
Free the resources allocated by ad738x_init().
int32_t ad738x_reference_sel(ad738x_dev *dev, ad738x_ref_sel ref_sel)
Enable internal or external reference.
int32_t ad738x_power_down_mode(ad738x_dev *dev, ad738x_pwd_mode pmode)
Device power down.
int32_t ad738x_oversampling_config(ad738x_dev *dev, ad738x_os_mode os_mode, ad738x_os_ratio os_ratio, ad738x_resolution res)
Sets the oversampling mode in the device (os_mode). Sets the oversampling ratio (osr). Sets the size of the conversion result data (res)
int32_t ad738x_reset(ad738x_dev *dev, ad738x_reset_type reset)
Device reset over SPI.
int32_t ad738x_set_conversion_mode(ad738x_dev *dev, ad738x_conv_mode mode)
Select if ADC A and ADC B output on both SDOA and SDOB lines (two wire mode) or only on on the SDOA line.
int32_t ad738x_spi_single_conversion(ad738x_dev *dev, uint16_t *adc_data)
Read conversion result from device.
int32_t ad738x_spi_write_mask(ad738x_dev *dev, uint8_t reg_addr, uint32_t mask, uint16_t data)
SPI write to device using a mask.
int32_t ad738x_spi_reg_write(ad738x_dev *dev, uint8_t reg_addr, uint16_t reg_data)
Write to device.
int32_t ad738x_spi_reg_read(ad738x_dev *dev, uint8_t reg_addr, uint16_t *reg_data)
Read from device.

Types Declarations

typedef enum {
	TWO_WIRE_MODE,
	ONE_WIRE_MODE
} ad738x_conv_mode;
?
typedef enum {
	NORMAL_OS_MODE,
	ROLLING_OS_MODE
} ad738x_os_mode;
?
typedef enum {
	OSR_DISABLED,
	OSR_X2,
	OSR_X4,
	OSR_X8,
	OSR_X16,
	OSR_X32,
} ad738x_os_ratio;
?
typedef enum {
	RES_16_BIT,
	RES_18_BIT
} ad738x_resolution;
?
typedef enum {
	SOFT_RESET,
	HARD_RESET
} ad738x_reset_type;
?
typedef enum {
	NORMAL_PWDM,
	FULL_PWDM
} ad738x_pwd_mode;
?
typedef enum {
	INT_REF,
	EXT_REF
} ad738x_ref_sel;
?
typedef struct {
        /* SPI */
        spi_desc		    *spi_desc;
        /* Device Settings */
        ad738x_conv_mode 	conv_mode;
	ad738x_resolution 	resolution;
} ad738x_dev;
?
typedef struct {
        /* SPI */
        spi_init_param		    spi_init;
        /* Device Settings */
        ad738x_conv_mode 		conv_mode;
        ad738x_ref_sel			ref_sel;
} ad738x_init_param;

HDL Downloads

No-OS Downloads

下載該資料的人也在下載 下載該資料的人還在閱讀
更多 >

評論

查看更多

下載排行

本周

  1. 1電子電路原理第七版PDF電子教材免費下載
  2. 0.00 MB  |  1491次下載  |  免費
  3. 2單片機典型實例介紹
  4. 18.19 MB  |  95次下載  |  1 積分
  5. 3S7-200PLC編程實例詳細資料
  6. 1.17 MB  |  27次下載  |  1 積分
  7. 4筆記本電腦主板的元件識別和講解說明
  8. 4.28 MB  |  18次下載  |  4 積分
  9. 5開關電源原理及各功能電路詳解
  10. 0.38 MB  |  11次下載  |  免費
  11. 6100W短波放大電路圖
  12. 0.05 MB  |  4次下載  |  3 積分
  13. 7基于單片機和 SG3525的程控開關電源設計
  14. 0.23 MB  |  4次下載  |  免費
  15. 8基于AT89C2051/4051單片機編程器的實驗
  16. 0.11 MB  |  4次下載  |  免費

本月

  1. 1OrCAD10.5下載OrCAD10.5中文版軟件
  2. 0.00 MB  |  234313次下載  |  免費
  3. 2PADS 9.0 2009最新版 -下載
  4. 0.00 MB  |  66304次下載  |  免費
  5. 3protel99下載protel99軟件下載(中文版)
  6. 0.00 MB  |  51209次下載  |  免費
  7. 4LabView 8.0 專業版下載 (3CD完整版)
  8. 0.00 MB  |  51043次下載  |  免費
  9. 5555集成電路應用800例(新編版)
  10. 0.00 MB  |  33562次下載  |  免費
  11. 6接口電路圖大全
  12. 未知  |  30320次下載  |  免費
  13. 7Multisim 10下載Multisim 10 中文版
  14. 0.00 MB  |  28588次下載  |  免費
  15. 8開關電源設計實例指南
  16. 未知  |  21539次下載  |  免費

總榜

  1. 1matlab軟件下載入口
  2. 未知  |  935053次下載  |  免費
  3. 2protel99se軟件下載(可英文版轉中文版)
  4. 78.1 MB  |  537793次下載  |  免費
  5. 3MATLAB 7.1 下載 (含軟件介紹)
  6. 未知  |  420026次下載  |  免費
  7. 4OrCAD10.5下載OrCAD10.5中文版軟件
  8. 0.00 MB  |  234313次下載  |  免費
  9. 5Altium DXP2002下載入口
  10. 未知  |  233046次下載  |  免費
  11. 6電路仿真軟件multisim 10.0免費下載
  12. 340992  |  191183次下載  |  免費
  13. 7十天學會AVR單片機與C語言視頻教程 下載
  14. 158M  |  183277次下載  |  免費
  15. 8proe5.0野火版下載(中文版免費下載)
  16. 未知  |  138039次下載  |  免費
澳门百家乐下三路| 全讯网22335555| 百家乐官网游戏介绍与分析| 大发888真钱账户注册| 云鼎百家乐现金网| 现金百家乐官网技巧| 青海省| 大发888官网吧| 百家乐路纸下| 鑫鑫百家乐官网的玩法技巧和规则 | 百家乐必胜绝技| 现金百家乐官网破解| 百家乐官网经验在哪找| 皇冠足球投| 网上娱乐城注册送彩金| 百家乐分析软件骗人| 小孟百家乐官网的玩法技巧和规则 | 大发888屡败屡战| 粤港澳百家乐赌场娱乐网规则| 百家乐优博u2bet| 百家乐拍是什么| 百家乐官网娱乐软件| 百家乐官网出庄概率| 足球投注网址| 蓝盾百家乐| 利来网上娱乐| 香港六合彩白小姐图库| 波克棋牌免费下载| 大发888赢钱| 大发888娱乐软件| 大发888娱乐城存款| 百家乐77scs官| 威尼斯人娱乐城提款| 大发888爱好| 天健棋牌大厅下载| 赌博投注| 襄垣县| 百家乐官网破解策略| 博彩百家乐官网在线| 德州扑克算牌器| 大发888 ipad版|