吴忠躺衫网络科技有限公司

電子發燒友App

硬聲App

0
  • 聊天消息
  • 系統消息
  • 評論與回復
登錄后你可以
  • 下載海量資料
  • 學習在線課程
  • 觀看技術視頻
  • 寫文章/發帖/加入社區
會員中心
創作中心

完善資料讓更多小伙伴認識你,還能領取20積分哦,立即完善>

3天內不再提示
電子發燒友網>電子資料下載>電子元器件應用>TFP101/A, TFP201/A, TFP401/A,

TFP101/A, TFP201/A, TFP401/A,

2010-08-24 | rar | 19 | 次下載 | 2積分

資料介紹

Changes to document:
?
In the package drawing page, change the package figure as described:
a) Re-size the thermal pad dashed box from its present size to 5.05mm, centered in the package.
b)?
Add dimensions to re-sized pad showing:??? 5.05 SQ
???? 3.95
c) Change note D to read:
The package thermal performance may be enhanced by bonding the thermal pad to an external thermal plane.
This pad is centered on the package and is electrically and thermally connected to the backside of the die.
?
In the “PowerPAD…” section, add a sentence to paragraph 1, reword paragraph 2 and add figure and
paragraphs between existing paragraphs 2 &3 to read:?
?
… Soldering the back side of the … to the application board is not required thermally as the
device power dissipation is well within the package capability when not soldered.? If traces or vias
are located under the back side pad, they should be protected by suitable solder mask or other
assembly technique to prevent inadvertent shorting to the exposed back side pad.
?
Soldering the back side pad of the device to a thermal land connected to the PCB ground plane is
recommended for electrical and EMI considerations.? The thermal land may be soldered to the
exposed PowerPAD using standard reflow soldering techniques.
?
The recommended pad size for the grounded thermal land is 5.6mm minimum, centered in the
device land pattern.? When vias are required to ground the land, multiple vias are recommended
for a low impedance connection to the ground plane.? Vias in the exposed pad should be small
enough or filled to prevent wicking the solder away from the interface between the package body
and the thermal land on the surface of the board during solder reflow.
下載該資料的人也在下載 下載該資料的人還在閱讀
更多 >

評論

查看更多

下載排行

本周

  1. 1電子電路原理第七版PDF電子教材免費下載
  2. 0.00 MB  |  1491次下載  |  免費
  3. 2單片機典型實例介紹
  4. 18.19 MB  |  95次下載  |  1 積分
  5. 3S7-200PLC編程實例詳細資料
  6. 1.17 MB  |  27次下載  |  1 積分
  7. 4筆記本電腦主板的元件識別和講解說明
  8. 4.28 MB  |  18次下載  |  4 積分
  9. 5開關電源原理及各功能電路詳解
  10. 0.38 MB  |  11次下載  |  免費
  11. 6100W短波放大電路圖
  12. 0.05 MB  |  4次下載  |  3 積分
  13. 7基于單片機和 SG3525的程控開關電源設計
  14. 0.23 MB  |  4次下載  |  免費
  15. 8基于AT89C2051/4051單片機編程器的實驗
  16. 0.11 MB  |  4次下載  |  免費

本月

  1. 1OrCAD10.5下載OrCAD10.5中文版軟件
  2. 0.00 MB  |  234313次下載  |  免費
  3. 2PADS 9.0 2009最新版 -下載
  4. 0.00 MB  |  66304次下載  |  免費
  5. 3protel99下載protel99軟件下載(中文版)
  6. 0.00 MB  |  51209次下載  |  免費
  7. 4LabView 8.0 專業版下載 (3CD完整版)
  8. 0.00 MB  |  51043次下載  |  免費
  9. 5555集成電路應用800例(新編版)
  10. 0.00 MB  |  33562次下載  |  免費
  11. 6接口電路圖大全
  12. 未知  |  30320次下載  |  免費
  13. 7Multisim 10下載Multisim 10 中文版
  14. 0.00 MB  |  28588次下載  |  免費
  15. 8開關電源設計實例指南
  16. 未知  |  21539次下載  |  免費

總榜

  1. 1matlab軟件下載入口
  2. 未知  |  935053次下載  |  免費
  3. 2protel99se軟件下載(可英文版轉中文版)
  4. 78.1 MB  |  537793次下載  |  免費
  5. 3MATLAB 7.1 下載 (含軟件介紹)
  6. 未知  |  420026次下載  |  免費
  7. 4OrCAD10.5下載OrCAD10.5中文版軟件
  8. 0.00 MB  |  234313次下載  |  免費
  9. 5Altium DXP2002下載入口
  10. 未知  |  233046次下載  |  免費
  11. 6電路仿真軟件multisim 10.0免費下載
  12. 340992  |  191183次下載  |  免費
  13. 7十天學會AVR單片機與C語言視頻教程 下載
  14. 158M  |  183277次下載  |  免費
  15. 8proe5.0野火版下載(中文版免費下載)
  16. 未知  |  138039次下載  |  免費
百家乐投注法减注| 四方百家乐的玩法技巧和规则| 百家乐官网真钱路怎么看| 大发888娱乐日博备用| 7人百家乐桌子| 真人百家乐官网轮盘| 足球赌球规则| 百家乐的技术与心态| 扎赉特旗| 百家乐咋样赢钱| 君怡百家乐官网的玩法技巧和规则| 百家乐官网娱乐开户| bet365合法吗| 大发888游戏技巧| 中国百家乐技巧| 百家乐微笑心法搜索| 百家乐官网77scs| 百家乐官网现金平台排名| 大发888玩法技巧| 伟博百家乐娱乐城| 百家乐群html| 百家乐游戏规则介绍| 百家乐官网那里信誉好| 乐天堂百家乐官网赌场娱乐网规则 | 百家乐开户投注| 百家乐连线游戏下载| 百家乐网站加盟| 网上百家乐骗人| 百家乐园胎教网| 新葡京百家乐现金| 百家乐官网必胜打| 闲和庄百家乐官网娱乐| 百家乐官网h游戏怎么玩| 百家乐官网两头压注| 河北省| 交城县| 迪威百家乐官网现场| 百家乐官网的必赢方法| 百家乐官网玩法有技巧| 百家乐官网游戏技巧| 迪威百家乐官网赌场娱乐网规则|